Amusement rides · Attraction systems · Turnkey park packages

Family Rides

Teacup Ride

27 or 36 seats; approximately 9 m diameter and 11 m footprint; approximately 11 kW; nine-cup reference structure.

Request technical sheet

Quick answer

27 or 36 seats; approximately 9 m diameter and 11 m footprint; approximately 11 kW; nine-cup reference structure.

Suitability and boundaries

Confirm foundation, power supply, site access and the standards applicable in the destination before ordering.

teacup-ride DINIS attraction

What the Teacup Ride is and the operating problem it solves

What the Teacup Ride is and the operating problem it solves
What the Teacup Ride is and the operating problem it solves

A teacup ride is positioned in the family rides category and built for family interaction, children’s rotation and indoor or outdoor family zone. 27 or 36 seats; approximately 9 m diameter and 11 m footprint; approximately 11 kW; nine-cup reference structure.

Every teacup ride project starts with the same discipline: define the guest, the site and the standard.

The buyers DINIS supports for this product are Children’s parks, FECs, city parks and amusement grounds. Demand is strongest in Southeast Asia, Middle East, Latin America and Africa, where operators use it as family interaction, children’s rotation and indoor or outdoor family zone. The right configuration follows from the guest profile and the operating model, which is why the specification is set from the site before a quotation is issued.

In practice, that means the seat count or cabin configuration, cycle time, theming and control system for the teacup ride are selected together, so the ride fits the day it is bought for.

  • Primary use: Family interaction, children’s rotation and indoor or outdoor family zone
  • Typical buyers: Children’s parks, FECs, city parks and amusement grounds
  • Key markets: Southeast Asia, Middle East, Latin America and Africa
  • Category: Family Rides

Teacup Ride reference specifications and engineering

Teacup Ride reference specifications and engineering
Teacup Ride reference specifications and engineering

27 or 36 seats; approximately 9 m diameter and 11 m footprint; approximately 11 kW; nine-cup reference structure.

Reference data for this model is kept in the technical summary above; capacity, dimensions and power are set from the site survey and the destination standards.

Keeping the teacup ride specification in structured fields means a buyer can extract capacity, footprint and power and compare them directly against another offer.

  • Reference specification recorded in the technical summary
  • Final values set from the site survey and destination standards

DINIS records these fields for the teacup ride as structured data so buyers can compare models on the same basis instead of reading marketing paragraphs.

Keeping the teacup ride specification in structured fields means a buyer can extract capacity, footprint and power and compare them directly against another offer.

The teacup ride technical summary stays visible beside the sales copy because headline price without those fields hides delivery differences.

DINIS records these fields for the teacup ride as structured data so buyers can compare models on the same basis instead of reading marketing paragraphs.

Keeping the teacup ride specification in structured fields means a buyer can extract capacity, footprint and power and compare them directly against another offer.

Site requirements and configuration choices for the Teacup Ride

Site requirements and configuration choices for the Teacup Ride
Site requirements and configuration choices for the Teacup Ride

Before a teacup ride is ordered, the available footprint, power supply, foundation or floor loading, height clearance and delivery access are confirmed, because they decide the variant more than the catalogue does.

The teacup ride can be configured with Cup theming, safety railing, floor, lighting and control cabinet, with every option checked for its effect on weight, wind load or control logic.

Options that touch the structure or electrics are best fixed early. A useful habit is to separate must-have customisation for the teacup ride from nice-to-have decoration, which keeps the quotation tied to the operating requirement.

  • Options reviewed for engineering impact: Cup theming, safety railing, floor, lighting and control cabinet

Before a teacup ride is ordered, the available project-specific footprint, supply and the foundation or floor loading are confirmed, because they decide the variant more than the catalogue does.

The site envelope for the teacup ride is fixed first: project-specific of available space, power, clearance and delivery access.

For the teacup ride, DINIS locks the site inputs (project-specific, ) before the specification is frozen, so the machine is configured to the venue.

Configuration options for the teacup ride include Cup theming, safety railing, floor, lighting and control cabinet, each reviewed for engineering impact rather than treated as decoration.

Safety, standards and documentation for the Teacup Ride

Safety, standards and documentation for the Teacup Ride
Safety, standards and documentation for the Teacup Ride

What follows for the teacup ride reflects the reference data DINIS publishes, verified against the engineering documentation before order confirmation. This page is maintained by DINIS engineering and checked against the current engineering documentation. This page was reviewed on 2026-10-20. Specifications, certifications and delivery scope are documented for each project and destination market.

For compliance, DINIS works to: CE compliance documentation for applicable models. The exact document set for the teacup ride is matched to the delivered configuration and the destination market.

The teacup ride is documented to the standard the territory accepts, not to a generic claim, so the package arrives ready to certify.

The information on this teacup ride page is drawn from the documented reference configuration and is re-checked during project scoping.

What follows for the teacup ride reflects the reference data DINIS publishes, verified against the engineering documentation before order confirmation.

This teacup ride page records the reference specification and the checks DINIS recommends before a quotation is fixed.

For compliance, DINIS works to: CE compliance documentation for applicable models. The exact document set for the teacup ride is matched to the delivered configuration and the destination market.

Installation, commissioning and operator training for the Teacup Ride

Installation, commissioning and operator training for the Teacup Ride
Installation, commissioning and operator training for the Teacup Ride

Installation for the teacup ride is defined before shipment so the civil and electrical interfaces are clear, and the scope states who provides foundations, utilities, lifting and local approvals.

For the teacup ride, handover readiness means verified safety devices, a trial run and a team trained on start-up, shutdown and emergency procedures.

For overseas projects the teacup ride schedule is sequenced around shipping, customs and site readiness, with the lead time fixed early to avoid handover delay.

Installation for the teacup ride is defined before shipment so the civil and electrical interfaces are clear, and the scope states who provides foundations, utilities, lifting and local approvals.

The teacup ride ships with its installation interface written down: drawings, supervision or remote review, commissioning and operator handover, with buyer tasks listed.

For the teacup ride, DINIS defines the installation split in advance so no civil or electrical task is discovered on site.

Commissioning the teacup ride includes function checks, safety-device verification and a trial-operation period, followed by operator start-up, shutdown and evacuation practice.

For the teacup ride, handover readiness means verified safety devices, a trial run and a team trained on start-up, shutdown and emergency procedures.

Maintenance, spare parts and lifecycle planning for the Teacup Ride

Maintenance, spare parts and lifecycle planning for the Teacup Ride
Maintenance, spare parts and lifecycle planning for the Teacup Ride

A teacup ride is a long-life asset, so the maintenance calendar should be planned before installation. On the teacup ride the parts that wear first are bearings, drive belts, restraint mechanisms, decorative FRP panels and lighting elements, so the maintenance calendar and parts list are planned before installation.

DINIS helps operators of the teacup ride split parts into hold-locally, reorder-on-schedule and ship-on-demand, which keeps downtime short.

For the teacup ride, lifecycle cost is decided by accessible wear parts, trained first-line maintenance and a realistic refresh plan for theming and electrics.

For this category the high-wear items on the teacup ride are bearings, drive belts, restraint mechanisms, decorative FRP panels and lighting elements, and a documented inspection routine plus a starter spare-parts list protect service life.

On the teacup ride the parts that wear first are bearings, drive belts, restraint mechanisms, decorative FRP panels and lighting elements, so the maintenance calendar and parts list are planned before installation.

The teacup ride is maintained around its wear items (bearings, drive belts, restraint mechanisms, decorative FRP panels and lighting elements), which keeps inspections predictable and downtime short.

Spare-parts lead time for the teacup ride matters as much as equipment lead time, and DINIS maps which parts to hold locally, which to reorder on a schedule and which can ship on demand.

Questions buyers ask about the Teacup Ride

The four answers below address the most common checks before a quotation request.

What information do I need before requesting a teacup ride quotation?

Send the target model or family, available footprint, guest profile and expected throughput, power supply, destination country, customisation needs and target opening date. A complete brief returns a qualified shortlist rather than a generic price list.

How should I compare the Teacup Ride across suppliers?

Compare identical fields: capacity, footprint, practical throughput, power, documentation scope, installation support, spare parts and lead time. A lower headline price often hides a smaller delivery scope.

Can the Teacup Ride be customised for my site?

Yes. Theming, layout, control configuration and capacity are set after a site review. Options such as Cup theming, safety railing, floor, lighting and control cabinet are evaluated for their effect on engineering, lead time and documentation.

What documentation comes with the Teacup Ride?

The package includes foundation guidance, installation drawings, operation manuals and maintenance schedules matched to the delivered scope and the standards accepted in the destination market.

Related resources

Qualified brief first

Send the footprint, guest profile and opening date.

Request technical quotation

Buyer questions

What information do you need before preparing a teacup ride quotation?

We need the venue format, available footprint and height limits, target guest profile, expected throughput, target opening date, power and site access, and destination country. With those inputs a DINIS engineer can confirm the suitable configuration, technical documents and delivery plan instead of providing a generic price.

Can the teacup ride be customized for a specific theme or site?

Yes. The available configuration includes Cup theming, safety railing, floor, lighting and control cabinet. Theme, color, layout, capacity and control configuration are reviewed against the project requirements, structural constraints and the standards applicable to the destination market.

Who typically buys this type of attraction?

Typical buyers include Children's parks, FECs, city parks and amusement grounds. The product is suited to Family interaction, children's rotation and indoor or outdoor family zone., with primary demand in Southeast Asia, Middle East, Latin America and Africa.

Why can prices for the same type of equipment vary between suppliers?

Price differences usually come from steel and material specification, drive and control components, safety redundancy, surface treatment, testing scope, packaging, installation support and warranty terms. Comparing only capacity and price may hide long-term maintenance, downtime and delivery risks.

Related attractions

Continue exploring.

large-carousel DINIS attraction
Family Rides Flagship

Large Carousel

24, 30, 36 or 48 seats; steel structure with FRP decoration. Drive power is configured by seat count and diameter and is suitable for indoor or outdoor installation.

View specification →
pirate-ship-ride DINIS attraction
Family Rides Flagship

Pirate Ship Ride

24 or 40 seats. The 24-seat model is approximately 10 m high; the 40-seat model occupies approximately 18 m x 9 m. Swing angle is about 50-60 degrees, 380V, with reference power…

View specification →
double-decker-carousel DINIS attraction
Family Rides Flagship

Double Decker Carousel

36, 48, 68 or 72 seats; starting diameter approximately 10.8 m and starting height approximately 8.3 m. FRP horses, LED lighting and steel platform with European, fantasy or hol…

View specification →
WhatsApp