Amusement rides · Attraction systems · Turnkey park packages

Family Rides

Flying Chair Ride

24 or 36 seats. The 36-seat model occupies approximately 20 m diameter and is about 9.2 m high with 50 kW reference power; the 24-seat model occupies about 12 m diameter and is …

Request technical sheet

Quick answer

24 or 36 seats. The 36-seat model occupies approximately 20 m diameter and is about 9.2 m high with 50 kW reference power; the 24-seat model

Suitability and boundaries

Confirm foundation, power supply, site access and the standards applicable in the destination before ordering.

flying-chair-ride DINIS attraction

What the Flying Chair Ride is and the operating problem it solves

What the Flying Chair Ride is and the operating problem it solves
What the Flying Chair Ride is and the operating problem it solves

A flying chair ride is positioned in the family rides category and built for family rotation ride, plaza attraction and night operation. 24 or 36 seats. The 36-seat model occupies approximately 20 m diameter and is about 9.2 m high with 50 kW reference power; the 24-seat model occupies about 12 m diameter and is about 7.5 m high with 10 kW reference power.

Buyers who get the best result from a flying chair ride treat it as part of a day, not as a standalone purchase.

The buyers DINIS supports for this product are Parks, amusement grounds, scenic areas and carnivals. Demand is strongest in Central Asia, Southeast Asia, Latin America, Africa and CIS, where operators use it as family rotation ride, plaza attraction and night operation. The right configuration follows from the guest profile and the operating model, which is why the specification is set from the site before a quotation is issued.

In practice, that means the seat count or cabin configuration, cycle time, theming and control system for the flying chair ride are selected together, so the ride fits the day it is bought for.

  • Primary use: Family rotation ride, plaza attraction and night operation
  • Typical buyers: Parks, amusement grounds, scenic areas and carnivals
  • Key markets: Central Asia, Southeast Asia, Latin America, Africa and CIS
  • Category: Family Rides

Flying Chair Ride reference specifications and engineering

Flying Chair Ride reference specifications and engineering
Flying Chair Ride reference specifications and engineering

24 or 36 seats. The 36-seat model occupies approximately 20 m diameter and is about 9.2 m high with 50 kW reference power; the 24-seat model occupies about 12 m diameter and is about 7.5 m high with 10 kW reference power.

Reference data for this model is kept in the technical summary above; capacity, dimensions and power are set from the site survey and the destination standards.

The flying chair ride technical summary stays visible beside the sales copy because headline price without those fields hides delivery differences.

  • Reference specification recorded in the technical summary
  • Final values set from the site survey and destination standards

DINIS records these fields for the flying chair ride as structured data so buyers can compare models on the same basis instead of reading marketing paragraphs.

Keeping the flying chair ride specification in structured fields means a buyer can extract capacity, footprint and power and compare them directly against another offer.

The flying chair ride technical summary stays visible beside the sales copy because headline price without those fields hides delivery differences.

DINIS records these fields for the flying chair ride as structured data so buyers can compare models on the same basis instead of reading marketing paragraphs.

Site requirements and configuration choices for the Flying Chair Ride

Site requirements and configuration choices for the Flying Chair Ride
Site requirements and configuration choices for the Flying Chair Ride

Before a flying chair ride is ordered, the available footprint, power supply, foundation or floor loading, height clearance and delivery access are confirmed, because they decide the variant more than the catalogue does.

Configuration options for the flying chair ride include Lighting, safety railing, seats, control cabinet and spare-parts package, each reviewed for engineering impact rather than treated as decoration.

Options that touch the structure or electrics are best fixed early. For the flying chair ride, options that touch the structure or electrics are fixed early and the rest is kept flexible, which protects the schedule.

  • Options reviewed for engineering impact: Lighting, safety railing, seats, control cabinet and spare-parts package

Before a flying chair ride is ordered, the available project-specific footprint, supply and the foundation or floor loading are confirmed, because they decide the variant more than the catalogue does.

The site envelope for the flying chair ride is fixed first: project-specific of available space, power, clearance and delivery access.

For the flying chair ride, DINIS locks the site inputs (project-specific, ) before the specification is frozen, so the machine is configured to the venue.

Configuration options for the flying chair ride include Lighting, safety railing, seats, control cabinet and spare-parts package, each reviewed for engineering impact rather than treated as decoration.

Safety, standards and documentation for the Flying Chair Ride

Safety, standards and documentation for the Flying Chair Ride
Safety, standards and documentation for the Flying Chair Ride

The information on this flying chair ride page is drawn from the documented reference configuration and is re-checked during project scoping. The DINIS engineering team owns the technical accuracy of this page and reviews it against the current documentation set. Review date: 2026-10-20. Specifications, certifications and delivery scope are documented for each project and destination market.

For compliance, DINIS works to: CE compliance documentation for applicable models. The exact document set for the flying chair ride is matched to the delivered configuration and the destination market.

The flying chair ride is documented to the standard the territory accepts, not to a generic claim, so the package arrives ready to certify.

The information on this flying chair ride page is drawn from the documented reference configuration and is re-checked during project scoping.

What follows for the flying chair ride reflects the reference data DINIS publishes, verified against the engineering documentation before order confirmation.

This flying chair ride page records the reference specification and the checks DINIS recommends before a quotation is fixed.

For compliance, DINIS works to: CE compliance documentation for applicable models. The exact document set for the flying chair ride is matched to the delivered configuration and the destination market.

Installation, commissioning and operator training for the Flying Chair Ride

Installation, commissioning and operator training for the Flying Chair Ride
Installation, commissioning and operator training for the Flying Chair Ride

The flying chair ride ships with its installation interface written down: drawings, supervision or remote review, commissioning and operator handover, with buyer tasks listed.

For the flying chair ride, handover readiness means verified safety devices, a trial run and a team trained on start-up, shutdown and emergency procedures.

The flying chair ride delivery plan runs backwards from opening day, so freight and site tasks are scheduled before they become urgent.

Installation for the flying chair ride is defined before shipment so the civil and electrical interfaces are clear, and the scope states who provides foundations, utilities, lifting and local approvals.

The flying chair ride ships with its installation interface written down: drawings, supervision or remote review, commissioning and operator handover, with buyer tasks listed.

For the flying chair ride, DINIS defines the installation split in advance so no civil or electrical task is discovered on site.

Commissioning the flying chair ride includes function checks, safety-device verification and a trial-operation period, followed by operator start-up, shutdown and evacuation practice.

For the flying chair ride, handover readiness means verified safety devices, a trial run and a team trained on start-up, shutdown and emergency procedures.

Maintenance, spare parts and lifecycle planning for the Flying Chair Ride

Maintenance, spare parts and lifecycle planning for the Flying Chair Ride
Maintenance, spare parts and lifecycle planning for the Flying Chair Ride

A flying chair ride is a long-life asset, so the maintenance calendar should be planned before installation. The flying chair ride is maintained around its wear items (bearings, drive belts, restraint mechanisms, decorative FRP panels and lighting elements), which keeps inspections predictable and downtime short.

Spare-parts lead time for the flying chair ride matters as much as equipment lead time, and DINIS maps which parts to hold locally, which to reorder on a schedule and which can ship on demand.

For the flying chair ride, lifecycle cost is decided by accessible wear parts, trained first-line maintenance and a realistic refresh plan for theming and electrics.

For this category the high-wear items on the flying chair ride are bearings, drive belts, restraint mechanisms, decorative FRP panels and lighting elements, and a documented inspection routine plus a starter spare-parts list protect service life.

On the flying chair ride the parts that wear first are bearings, drive belts, restraint mechanisms, decorative FRP panels and lighting elements, so the maintenance calendar and parts list are planned before installation.

The flying chair ride is maintained around its wear items (bearings, drive belts, restraint mechanisms, decorative FRP panels and lighting elements), which keeps inspections predictable and downtime short.

Questions buyers ask about the Flying Chair Ride

The four answers below address the most common checks before a quotation request.

What information do I need before requesting a flying chair ride quotation?

Send the target model or family, available footprint, guest profile and expected throughput, power supply, destination country, customisation needs and target opening date. A complete brief returns a qualified shortlist rather than a generic price list.

How should I compare the Flying Chair Ride across suppliers?

Compare identical fields: capacity, footprint, practical throughput, power, documentation scope, installation support, spare parts and lead time. A lower headline price often hides a smaller delivery scope.

Can the Flying Chair Ride be customised for my site?

Yes. Theming, layout, control configuration and capacity are set after a site review. Options such as Lighting, safety railing, seats, control cabinet and spare-parts package are evaluated for their effect on engineering, lead time and documentation.

What documentation comes with the Flying Chair Ride?

The package includes foundation guidance, installation drawings, operation manuals and maintenance schedules matched to the delivered scope and the standards accepted in the destination market.

Related resources

Qualified brief first

Send the footprint, guest profile and opening date.

Request technical quotation

Buyer questions

What information do you need before preparing a flying chair ride quotation?

We need the venue format, available footprint and height limits, target guest profile, expected throughput, target opening date, power and site access, and destination country. With those inputs a DINIS engineer can confirm the suitable configuration, technical documents and delivery plan instead of providing a generic price.

Can the flying chair ride be customized for a specific theme or site?

Yes. The available configuration includes Lighting, safety railing, seats, control cabinet and spare-parts package. Theme, color, layout, capacity and control configuration are reviewed against the project requirements, structural constraints and the standards applicable to the destination market.

Who typically buys this type of attraction?

Typical buyers include Parks, amusement grounds, scenic areas and carnivals. The product is suited to Family rotation ride, plaza attraction and night operation., with primary demand in Central Asia, Southeast Asia, Latin America, Africa and CIS.

Why can prices for the same type of equipment vary between suppliers?

Price differences usually come from steel and material specification, drive and control components, safety redundancy, surface treatment, testing scope, packaging, installation support and warranty terms. Comparing only capacity and price may hide long-term maintenance, downtime and delivery risks.

Related attractions

Continue exploring.

double-decker-carousel DINIS attraction
Family Rides Flagship

Double Decker Carousel

36, 48, 68 or 72 seats; starting diameter approximately 10.8 m and starting height approximately 8.3 m. FRP horses, LED lighting and steel platform with European, fantasy or hol…

View specification →
pirate-ship-ride DINIS attraction
Family Rides Flagship

Pirate Ship Ride

24 or 40 seats. The 24-seat model is approximately 10 m high; the 40-seat model occupies approximately 18 m x 9 m. Swing angle is about 50-60 degrees, 380V, with reference power…

View specification →
large-carousel DINIS attraction
Family Rides Flagship

Large Carousel

24, 30, 36 or 48 seats; steel structure with FRP decoration. Drive power is configured by seat count and diameter and is suitable for indoor or outdoor installation.

View specification →
WhatsApp