Thrill & Major Rides
Free Fall Tower
63 m reference height; footprint approximately 15 m x 15 m; 32 passengers; approximately 520 kW; safety brake and PLC control system.
Quick answer
63 m reference height; footprint approximately 15 m x 15 m; 32 passengers; approximately 520 kW; safety brake and PLC control system.
Suitability and boundaries
Confirm foundation, power supply, site access and the standards applicable in the destination before ordering.

What the Free Fall Tower is and the operating problem it solves

A free fall tower is positioned in the thrill & major rides category and built for high-value thrill-zone icon and signature drop experience. 63 m reference height; footprint approximately 15 m x 15 m; 32 passengers; approximately 520 kW; safety brake and PLC control system.
A free fall tower is only as good as the site and operating plan around it.
The buyers DINIS supports for this product are Theme parks, thrill parks and tourism parks. Demand is strongest in Middle East, Southeast Asia and Latin America, where operators use it as high-value thrill-zone icon and signature drop experience. The right configuration follows from the guest profile and the operating model, which is why the specification is set from the site before a quotation is issued.
What follows for the free fall tower is a shortlist built around the guest and the site, with headline capacity treated as one input rather than the deciding number.
- Primary use: High-value thrill-zone icon and signature drop experience
- Typical buyers: Theme parks, thrill parks and tourism parks
- Key markets: Middle East, Southeast Asia and Latin America
- Category: Thrill & Major Rides
Free Fall Tower reference specifications and engineering

63 m reference height; footprint approximately 15 m x 15 m; 32 passengers; approximately 520 kW; safety brake and PLC control system.
Reference data for this model is kept in the technical summary above; capacity, dimensions and power are set from the site survey and the destination standards.
Keeping the free fall tower specification in structured fields means a buyer can extract capacity, footprint and power and compare them directly against another offer.
- Reference specification recorded in the technical summary
- Final values set from the site survey and destination standards
DINIS records these fields for the free fall tower as structured data so buyers can compare models on the same basis instead of reading marketing paragraphs.
Keeping the free fall tower specification in structured fields means a buyer can extract capacity, footprint and power and compare them directly against another offer.
The free fall tower technical summary stays visible beside the sales copy because headline price without those fields hides delivery differences.
DINIS records these fields for the free fall tower as structured data so buyers can compare models on the same basis instead of reading marketing paragraphs.
Keeping the free fall tower specification in structured fields means a buyer can extract capacity, footprint and power and compare them directly against another offer.
Site requirements and configuration choices for the Free Fall Tower

Before a free fall tower is ordered, the available footprint, power supply, foundation or floor loading, height clearance and delivery access are confirmed, because they decide the variant more than the catalogue does.
Configuration options for the free fall tower include Foundation drawings, safety railing, control cabinet, installation training and maintenance spares, each reviewed for engineering impact rather than treated as decoration.
Options that touch the structure or electrics are best fixed early. For the free fall tower, options that touch the structure or electrics are fixed early and the rest is kept flexible, which protects the schedule.
- Options reviewed for engineering impact: Foundation drawings, safety railing, control cabinet, installation training and maintenance spares
Before a free fall tower is ordered, the available project-specific footprint, supply and the foundation or floor loading are confirmed, because they decide the variant more than the catalogue does.
The site envelope for the free fall tower is fixed first: project-specific of available space, power, clearance and delivery access.
For the free fall tower, DINIS locks the site inputs (project-specific, ) before the specification is frozen, so the machine is configured to the venue.
Configuration options for the free fall tower include Foundation drawings, safety railing, control cabinet, installation training and maintenance spares, each reviewed for engineering impact rather than treated as decoration.
Safety, standards and documentation for the Free Fall Tower

The information on this free fall tower page is drawn from the documented reference configuration and is re-checked during project scoping. The DINIS engineering team owns the technical accuracy of this page and reviews it against the current documentation set. Review date: 2026-10-20. Specifications, certifications and delivery scope are documented for each project and destination market.
For compliance, DINIS works to: CE compliance documentation for applicable models. The exact document set for the free fall tower is matched to the delivered configuration and the destination market.
The free fall tower is documented to the standard the territory accepts, not to a generic claim, so the package arrives ready to certify.
The information on this free fall tower page is drawn from the documented reference configuration and is re-checked during project scoping.
What follows for the free fall tower reflects the reference data DINIS publishes, verified against the engineering documentation before order confirmation.
This free fall tower page records the reference specification and the checks DINIS recommends before a quotation is fixed.
For compliance, DINIS works to: CE compliance documentation for applicable models. The exact document set for the free fall tower is matched to the delivered configuration and the destination market.
Installation, commissioning and operator training for the Free Fall Tower

The free fall tower ships with its installation interface written down: drawings, supervision or remote review, commissioning and operator handover, with buyer tasks listed.
For the free fall tower, handover readiness means verified safety devices, a trial run and a team trained on start-up, shutdown and emergency procedures.
The free fall tower delivery plan runs backwards from opening day, so freight and site tasks are scheduled before they become urgent.
Installation for the free fall tower is defined before shipment so the civil and electrical interfaces are clear, and the scope states who provides foundations, utilities, lifting and local approvals.
The free fall tower ships with its installation interface written down: drawings, supervision or remote review, commissioning and operator handover, with buyer tasks listed.
For the free fall tower, DINIS defines the installation split in advance so no civil or electrical task is discovered on site.
Commissioning the free fall tower includes function checks, safety-device verification and a trial-operation period, followed by operator start-up, shutdown and evacuation practice.
For the free fall tower, handover readiness means verified safety devices, a trial run and a team trained on start-up, shutdown and emergency procedures.
Maintenance, spare parts and lifecycle planning for the Free Fall Tower

A free fall tower is a long-life asset, so the maintenance calendar should be planned before installation. The free fall tower is maintained around its wear items (brake linings, drive couplings, hydraulic seals, restraint locks and wear pins), which keeps inspections predictable and downtime short.
Spare-parts lead time for the free fall tower matters as much as equipment lead time, and DINIS maps which parts to hold locally, which to reorder on a schedule and which can ship on demand.
For the free fall tower, lifecycle cost is decided by accessible wear parts, trained first-line maintenance and a realistic refresh plan for theming and electrics.
For this category the high-wear items on the free fall tower are brake linings, drive couplings, hydraulic seals, restraint locks and wear pins, and a documented inspection routine plus a starter spare-parts list protect service life.
On the free fall tower the parts that wear first are brake linings, drive couplings, hydraulic seals, restraint locks and wear pins, so the maintenance calendar and parts list are planned before installation.
The free fall tower is maintained around its wear items (brake linings, drive couplings, hydraulic seals, restraint locks and wear pins), which keeps inspections predictable and downtime short.
Questions buyers ask about the Free Fall Tower
The four answers below address the most common checks before a quotation request.
What information do I need before requesting a free fall tower quotation?
Send the target model or family, available footprint, guest profile and expected throughput, power supply, destination country, customisation needs and target opening date. A complete brief returns a qualified shortlist rather than a generic price list.
How should I compare the Free Fall Tower across suppliers?
Compare identical fields: capacity, footprint, practical throughput, power, documentation scope, installation support, spare parts and lead time. A lower headline price often hides a smaller delivery scope.
Can the Free Fall Tower be customised for my site?
Yes. Theming, layout, control configuration and capacity are set after a site review. Options such as Foundation drawings, safety railing, control cabinet, installation training and maintenance spares are evaluated for their effect on engineering, lead time and documentation.
What documentation comes with the Free Fall Tower?
The package includes foundation guidance, installation drawings, operation manuals and maintenance schedules matched to the delivered scope and the standards accepted in the destination market.
Related resources
Qualified brief first
Send the footprint, guest profile and opening date.
Buyer questions
What information do you need before preparing a free fall tower quotation?
We need the venue format, available footprint and height limits, target guest profile, expected throughput, target opening date, power and site access, and destination country. With those inputs a DINIS engineer can confirm the suitable configuration, technical documents and delivery plan instead of providing a generic price.
Can the free fall tower be customized for a specific theme or site?
Yes. The available configuration includes Foundation drawings, safety railing, control cabinet, installation training and maintenance spares. Theme, color, layout, capacity and control configuration are reviewed against the project requirements, structural constraints and the standards applicable to the destination market.
Who typically buys this type of attraction?
Typical buyers include Theme parks, thrill parks and tourism parks. The product is suited to High-value thrill-zone icon and signature drop experience., with primary demand in Middle East, Southeast Asia and Latin America.
Why can prices for the same type of equipment vary between suppliers?
Price differences usually come from steel and material specification, drive and control components, safety redundancy, surface treatment, testing scope, packaging, installation support and warranty terms. Comparing only capacity and price may hide long-term maintenance, downtime and delivery risks.