Ferris Wheels & Observation
Flying Tower
65 m reference height; operating height approximately 52 m; 36 passengers; approximately 9.8 rpm; approximately 250 kW; requires foundation and wind-load verification.
Quick answer
65 m reference height; operating height approximately 52 m; 36 passengers; approximately 9.8 rpm; approximately 250 kW; requires foundation
Suitability and boundaries
Confirm foundation, power supply, site access and the standards applicable in the destination before ordering.

What the Flying Tower is and the operating problem it solves

A flying tower is positioned in the ferris wheels & observation category and built for high-altitude observation, thrill experience and night-time visual focus. 65 m reference height; operating height approximately 52 m; 36 passengers; approximately 9.8 rpm; approximately 250 kW; requires foundation and wind-load verification.
Every flying tower project starts with the same discipline: define the guest, the site and the standard.
The buyers DINIS supports for this product are Theme parks, scenic areas and city parks. Demand is strongest in Middle East, Southeast Asia, Latin America and CIS, where operators use it as high-altitude observation, thrill experience and night-time visual focus. The right configuration follows from the guest profile and the operating model, which is why the specification is set from the site before a quotation is issued.
What follows for the flying tower is a shortlist built around the guest and the site, with headline capacity treated as one input rather than the deciding number.
- Primary use: High-altitude observation, thrill experience and night-time visual focus
- Typical buyers: Theme parks, scenic areas and city parks
- Key markets: Middle East, Southeast Asia, Latin America and CIS
- Category: Ferris Wheels & Observation
Flying Tower reference specifications and engineering

65 m reference height; operating height approximately 52 m; 36 passengers; approximately 9.8 rpm; approximately 250 kW; requires foundation and wind-load verification.
The reference values for this model are stated in the technical summary above, where the seat or cabin configuration, dimensions and power are recorded together. Final figures are set from the site survey and the destination standards.
Keeping the flying tower specification in structured fields means a buyer can extract capacity, footprint and power and compare them directly against another offer.
- Reference specification recorded in the technical summary
- Final values set from the site survey and destination standards
DINIS records these fields for the flying tower as structured data so buyers can compare models on the same basis instead of reading marketing paragraphs.
Keeping the flying tower specification in structured fields means a buyer can extract capacity, footprint and power and compare them directly against another offer.
The flying tower technical summary stays visible beside the sales copy because headline price without those fields hides delivery differences.
DINIS records these fields for the flying tower as structured data so buyers can compare models on the same basis instead of reading marketing paragraphs.
Site requirements and configuration choices for the Flying Tower

Before a flying tower is ordered, the available footprint, power supply, foundation or floor loading, height clearance and delivery access are confirmed, because they decide the variant more than the catalogue does.
The flying tower can be configured with Suspended chairs, LED system, control system, foundation drawings and installation team, with every option checked for its effect on weight, wind load or control logic.
Options that touch the structure or electrics are best fixed early. A useful habit is to separate must-have customisation for the flying tower from nice-to-have decoration, which keeps the quotation tied to the operating requirement.
- Options reviewed for engineering impact: Suspended chairs, LED system, control system, foundation drawings and installation team
Before a flying tower is ordered, the available project-specific footprint, supply and the foundation or floor loading are confirmed, because they decide the variant more than the catalogue does.
The site envelope for the flying tower is fixed first: project-specific of available space, power, clearance and delivery access.
For the flying tower, DINIS locks the site inputs (project-specific, ) before the specification is frozen, so the machine is configured to the venue.
Configuration options for the flying tower include Suspended chairs, LED system, control system, foundation drawings and installation team, each reviewed for engineering impact rather than treated as decoration.
Safety, standards and documentation for the Flying Tower

The information on this flying tower page is drawn from the documented reference configuration and is re-checked during project scoping. The DINIS engineering team owns the technical accuracy of this page and reviews it against the current documentation set. Review date: 2026-10-20. Specifications, certifications and delivery scope are documented for each project and destination market.
For compliance, DINIS works to: CE compliance documentation for applicable models. The exact document set for the flying tower is matched to the delivered configuration and the destination market.
The flying tower is documented to the standard the territory accepts, not to a generic claim, so the package arrives ready to certify.
The information on this flying tower page is drawn from the documented reference configuration and is re-checked during project scoping.
What follows for the flying tower reflects the reference data DINIS publishes, verified against the engineering documentation before order confirmation.
This flying tower page records the reference specification and the checks DINIS recommends before a quotation is fixed.
For compliance, DINIS works to: CE compliance documentation for applicable models. The exact document set for the flying tower is matched to the delivered configuration and the destination market.
Installation, commissioning and operator training for the Flying Tower

For the flying tower, DINIS defines the installation split in advance so no civil or electrical task is discovered on site.
Commissioning the flying tower includes function checks, safety-device verification and a trial-operation period, followed by operator start-up, shutdown and evacuation practice.
DINIS sequences the flying tower around manufacturing, export packaging and installation, with the lead time set early to protect the date.
Installation for the flying tower is defined before shipment so the civil and electrical interfaces are clear, and the scope states who provides foundations, utilities, lifting and local approvals.
The flying tower ships with its installation interface written down: drawings, supervision or remote review, commissioning and operator handover, with buyer tasks listed.
For the flying tower, DINIS defines the installation split in advance so no civil or electrical task is discovered on site.
Commissioning the flying tower includes function checks, safety-device verification and a trial-operation period, followed by operator start-up, shutdown and evacuation practice.
For the flying tower, handover readiness means verified safety devices, a trial run and a team trained on start-up, shutdown and emergency procedures.
The flying tower is released for opening only after the checks are documented and the operating team has practised the routines.
Maintenance, spare parts and lifecycle planning for the Flying Tower

A flying tower is a long-life asset, so the maintenance calendar should be planned before installation. For this category the high-wear items on the flying tower are hub and rim bearings, cabin door mechanisms, drive motors and lighting modules, and a documented inspection routine plus a starter spare-parts list protect service life.
For the flying tower, the parts plan is agreed before installation so an annual inspection stays a planned event rather than an unplanned closure.
Planning the flying tower maintenance calendar before installation is what keeps the ride earning instead of degrading into ad-hoc repair.
For this category the high-wear items on the flying tower are hub and rim bearings, cabin door mechanisms, drive motors and lighting modules, and a documented inspection routine plus a starter spare-parts list protect service life.
On the flying tower the parts that wear first are hub and rim bearings, cabin door mechanisms, drive motors and lighting modules, so the maintenance calendar and parts list are planned before installation.
The flying tower is maintained around its wear items (hub and rim bearings, cabin door mechanisms, drive motors and lighting modules), which keeps inspections predictable and downtime short.
Questions buyers ask about the Flying Tower
The four answers below address the most common checks before a quotation request.
What information do I need before requesting a flying tower quotation?
Send the target model or family, available footprint, guest profile and expected throughput, power supply, destination country, customisation needs and target opening date. A complete brief returns a qualified shortlist rather than a generic price list.
How should I compare the Flying Tower across suppliers?
Compare identical fields: capacity, footprint, practical throughput, power, documentation scope, installation support, spare parts and lead time. A lower headline price often hides a smaller delivery scope.
Can the Flying Tower be customised for my site?
Yes. Theming, layout, control configuration and capacity are set after a site review. Options such as Suspended chairs, LED system, control system, foundation drawings and installation team are evaluated for their effect on engineering, lead time and documentation.
What documentation comes with the Flying Tower?
The package includes foundation guidance, installation drawings, operation manuals and maintenance schedules matched to the delivered scope and the standards accepted in the destination market.
Related resources
Qualified brief first
Send the footprint, guest profile and opening date.
Buyer questions
What information do you need before preparing a flying tower quotation?
We need the venue format, available footprint and height limits, target guest profile, expected throughput, target opening date, power and site access, and destination country. With those inputs a DINIS engineer can confirm the suitable configuration, technical documents and delivery plan instead of providing a generic price.
Can the flying tower be customized for a specific theme or site?
Yes. The available configuration includes Suspended chairs, LED system, control system, foundation drawings and installation team. Theme, color, layout, capacity and control configuration are reviewed against the project requirements, structural constraints and the standards applicable to the destination market.
Who typically buys this type of attraction?
Typical buyers include Theme parks, scenic areas and city parks. The product is suited to High-altitude observation, thrill experience and night-time visual focus., with primary demand in Middle East, Southeast Asia, Latin America and CIS.
Why can prices for the same type of equipment vary between suppliers?
Price differences usually come from steel and material specification, drive and control components, safety redundancy, surface treatment, testing scope, packaging, installation support and warranty terms. Comparing only capacity and price may hide long-term maintenance, downtime and delivery risks.