Amusement rides · Attraction systems · Turnkey park packages

Ferris Wheels & Observation

50m Truss Ferris Wheel

A conventional truss 50-meter wheel with 128-passenger capacity for landmark and night-view projects.

Request technical sheet

Quick answer

A conventional truss 50-meter wheel with 128-passenger capacity for landmark and night-view projects.

Suitability and boundaries

Confirm foundation, power supply, site access and the standards applicable in the destination before ordering.

50m-truss-ferris-wheel DINIS attraction

What the 50m Truss Ferris Wheel is and the operating problem it solves

What the 50m Truss Ferris Wheel is and the operating problem it solves
What the 50m Truss Ferris Wheel is and the operating problem it solves

A 50m truss ferris wheel is positioned in the ferris wheels & observation category and built for theme parks. Rated passengers 4 x 32 = 128; rated linear speed 0.204 m/s; rated power 25kW; drive power 18kW; voltage 380V 50Hz; wheel diameter 45.14m; equipment height 49.8m excluding lightning rod; footprint 35m x 32m.

Every 50m truss ferris wheel project starts with the same discipline: define the guest, the site and the standard.

The buyers DINIS supports for this product are Theme Parks. Demand is strongest in global markets, where operators use it as theme parks. The right configuration follows from the guest profile and the operating model, which is why the specification is set from the site before a quotation is issued.

For the 50m truss ferris wheel, the practical consequence is a configuration review instead of a price-first conversation, because the operating model decides the specification.

  • Primary use: Theme Parks
  • Typical buyers: Theme Parks
  • Key markets: global markets
  • Category: Ferris Wheels & Observation

In practice, that means the seat count or cabin configuration, cycle time, theming and control system for the [object Object] are selected together, so the ride fits the day it is bought for.

50m Truss Ferris Wheel reference specifications and engineering

50m Truss Ferris Wheel reference specifications and engineering
50m Truss Ferris Wheel reference specifications and engineering

Rated passengers 4 x 32 = 128; rated linear speed 0.204 m/s; rated power 25kW; drive power 18kW; voltage 380V 50Hz; wheel diameter 45.14m; equipment height 49.8m excluding lightning rod; footprint 35m x 32m.

Reference values for this model are 128 passengers (32 cabins x 4) capacity, 49.8 m height, 35 m x 32 m footprint, 25 kW rated / 18 kW drive power, 380V 50Hz voltage, 0.204 m/s speed / cycle. These values anchor the first engineering conversation; final figures are set from the site survey and the destination standards.

Keeping the 50m truss ferris wheel specification in structured fields means a buyer can extract capacity, footprint and power and compare them directly against another offer.

  • Capacity: 128 passengers (32 cabins x 4)
  • Height: 49.8 m
  • Footprint: 35 m x 32 m
  • Power: 25 kW rated / 18 kW drive
  • Voltage: 380V 50Hz
  • Speed / cycle: 0.204 m/s

DINIS records these fields for the 50m truss ferris wheel as structured data so buyers can compare models on the same basis instead of reading marketing paragraphs.

Keeping the 50m truss ferris wheel specification in structured fields means a buyer can extract capacity, footprint and power and compare them directly against another offer.

Site requirements and configuration choices for the 50m Truss Ferris Wheel

Site requirements and configuration choices for the 50m Truss Ferris Wheel
Site requirements and configuration choices for the 50m Truss Ferris Wheel

For the 50m truss ferris wheel, DINIS locks the site inputs (35 m x 32 m, 380V 50Hz) before the specification is frozen, so the machine is configured to the venue.

The 50m truss ferris wheel can be configured with Cabin theming, LED lighting, foundation drawings, installation supervision, with every option checked for its effect on weight, wind load or control logic.

Options that touch the structure or electrics are best fixed early. For the 50m truss ferris wheel, options that touch the structure or electrics are fixed early and the rest is kept flexible, which protects the schedule.

  • Site footprint: 35 m x 32 m
  • Power supply: 380V 50Hz
  • Options reviewed for engineering impact: Cabin theming, LED lighting, foundation drawings, installation supervision

Before a 50m truss ferris wheel is ordered, the available 35 m x 32 m footprint, 380V 50Hz supply and the foundation or floor loading are confirmed, because they decide the variant more than the catalogue does.

The site envelope for the 50m truss ferris wheel is fixed first: 35 m x 32 m of available space, 380V 50Hz power, clearance and delivery access.

For the 50m truss ferris wheel, DINIS locks the site inputs (35 m x 32 m, 380V 50Hz) before the specification is frozen, so the machine is configured to the venue.

Safety, standards and documentation for the 50m Truss Ferris Wheel

Safety, standards and documentation for the 50m Truss Ferris Wheel
Safety, standards and documentation for the 50m Truss Ferris Wheel

This 50m truss ferris wheel page records the reference specification and the checks DINIS recommends before a quotation is fixed. Technical ownership for this page sits with DINIS engineering, and the content is reviewed against the current documentation set. Current as of 2026-10-20. Specifications, certifications and delivery scope are documented for each project and destination market.

For compliance, DINIS works to: CE compliance documentation for applicable models. The exact document set for the 50m truss ferris wheel is matched to the delivered configuration and the destination market.

For the 50m truss ferris wheel, the certification route is confirmed per destination, and buyers should request the same evidence from every supplier they compare.

The information on this 50m truss ferris wheel page is drawn from the documented reference configuration and is re-checked during project scoping.

What follows for the 50m truss ferris wheel reflects the reference data DINIS publishes, verified against the engineering documentation before order confirmation.

This 50m truss ferris wheel page records the reference specification and the checks DINIS recommends before a quotation is fixed.

For compliance, DINIS works to: CE compliance documentation for applicable models. The exact document set for the 50m truss ferris wheel is matched to the delivered configuration and the destination market.

Installation, commissioning and operator training for the 50m Truss Ferris Wheel

Installation, commissioning and operator training for the 50m Truss Ferris Wheel
Installation, commissioning and operator training for the 50m Truss Ferris Wheel

The 50m truss ferris wheel ships with its installation interface written down: drawings, supervision or remote review, commissioning and operator handover, with buyer tasks listed.

For the 50m truss ferris wheel, handover readiness means verified safety devices, a trial run and a team trained on start-up, shutdown and emergency procedures.

For overseas projects the 50m truss ferris wheel schedule is sequenced around shipping, customs and site readiness, with the lead time fixed early to avoid handover delay.

Installation for the 50m truss ferris wheel is defined before shipment so the civil and electrical interfaces are clear, and the scope states who provides foundations, utilities, lifting and local approvals.

The 50m truss ferris wheel ships with its installation interface written down: drawings, supervision or remote review, commissioning and operator handover, with buyer tasks listed.

For the 50m truss ferris wheel, DINIS defines the installation split in advance so no civil or electrical task is discovered on site.

Commissioning the 50m truss ferris wheel includes function checks, safety-device verification and a trial-operation period, followed by operator start-up, shutdown and evacuation practice.

For the 50m truss ferris wheel, handover readiness means verified safety devices, a trial run and a team trained on start-up, shutdown and emergency procedures.

Maintenance, spare parts and lifecycle planning for the 50m Truss Ferris Wheel

Maintenance, spare parts and lifecycle planning for the 50m Truss Ferris Wheel
Maintenance, spare parts and lifecycle planning for the 50m Truss Ferris Wheel

A 50m truss ferris wheel is a long-life asset, so the maintenance calendar should be planned before installation. The 50m truss ferris wheel is maintained around its wear items (hub and rim bearings, cabin door mechanisms, drive motors and lighting modules), which keeps inspections predictable and downtime short.

For the 50m truss ferris wheel, the parts plan is agreed before installation so an annual inspection stays a planned event rather than an unplanned closure.

The 50m truss ferris wheel earns over its design life when maintenance is planned early, because reactive repair and long closures cost more than scheduled care.

For this category the high-wear items on the 50m truss ferris wheel are hub and rim bearings, cabin door mechanisms, drive motors and lighting modules, and a documented inspection routine plus a starter spare-parts list protect service life.

On the 50m truss ferris wheel the parts that wear first are hub and rim bearings, cabin door mechanisms, drive motors and lighting modules, so the maintenance calendar and parts list are planned before installation.

The 50m truss ferris wheel is maintained around its wear items (hub and rim bearings, cabin door mechanisms, drive motors and lighting modules), which keeps inspections predictable and downtime short.

Questions buyers ask about the 50m Truss Ferris Wheel

The four answers below address the most common checks before a quotation request.

What information do I need before requesting a 50m truss ferris wheel quotation?

Send the target model or family, available footprint, guest profile and expected throughput, power supply, destination country, customisation needs and target opening date. A complete brief returns a qualified shortlist rather than a generic price list.

How should I compare the 50m Truss Ferris Wheel across suppliers?

Compare identical fields: capacity, footprint, practical throughput, power, documentation scope, installation support, spare parts and lead time. A lower headline price often hides a smaller delivery scope.

Can the 50m Truss Ferris Wheel be customised for my site?

Yes. Theming, layout, control configuration and capacity are set after a site review. Options such as Cabin theming, LED lighting, foundation drawings, installation supervision are evaluated for their effect on engineering, lead time and documentation.

What documentation comes with the 50m Truss Ferris Wheel?

The package includes foundation guidance, installation drawings, operation manuals and maintenance schedules matched to the delivered scope and the standards accepted in the destination market.

Related resources

Qualified brief first

Send the footprint, guest profile and opening date.

Request technical quotation

Buyer questions

Is the 50m truss ferris wheel configurable for a specific site?

Yes. Height, cabin/vehicle configuration, theming, foundation and control systems are confirmed after a site review. Reference configuration: Rated passengers 4 x 32 = 128; rated linear speed 0.204 m/s; rated power 25kW; drive power 18kW; voltage 380V 50Hz; wheel diameter 45.14m; equipment height 49.8m excluding lightning rod; footprint 35m x 32m.

What documentation is provided for the 50m truss ferris wheel?

The project package includes foundation guidance, installation drawings, operation manuals and maintenance schedules, subject to the confirmed scope. Reference data: 128 passengers (32 cabins x 4) · 35 m x 32 m · 25 kW rated / 18 kW drive.

Do you support overseas installation?

DINIS can provide installation supervision, commissioning and operator training. Remote support and spare parts are also available.

Related attractions

Continue exploring.

flying-tower DINIS attraction
Ferris Wheels & Observation Advantage

Flying Tower

65 m reference height; operating height approximately 52 m; 36 passengers; approximately 9.8 rpm; approximately 250 kW; requires foundation and wind-load verification.

View specification →
42m-ferris-wheel DINIS attraction
Ferris Wheels & Observation

42m Ferris Wheel

A 42-meter landmark wheel with 24 cabins, 96-passenger capacity and a 20m x 20m footprint.

Capacity
96 passengers (24 cabins x 4)
View specification →
WhatsApp